FP1 Titan Powerbox

The PowerBox can charge Helios and Titan Tubes inside their respective cases. When taken out of the case they can also be used to hard-wire tubes for a longer usage. In addition, the PowerBox can add DMX, Artnet and sACN data to your tubes. Power and Data can both run over special cables so only 1 cable is needed to connect a tube to the PowerBox.

PowerBox is compatable with the Titan Tube, Helios Tube and Pixel Tube. Included in Titan, Helios and Pixel tube sets.

Includes 1x Powercon True1 AC cable, 8x short DC cable.

ELECTRICAL

• Input Voltage: 90~250 VAC
• Current: 4.4A@115VAC, 3A@230VAC
• Output Voltage: 10 x 24VDC
• Output Current: 10 x 2A
• Power in: Via Powercon True1
• Power out: Via Powercon True1

DATA

• Data Input by:

–  XLR-DMX

–  Art-Net (1 Universe)

–  sACN (1 Universe)

IP Address can be selected between 2.x, 10.x and DHCP.

Universe ID can be set by web-interface or pushbutton (by button only 1-16).

• Output Data: DMX via DC sockets
• Wireless Data: n/a
• Data Sockets: 5-pin XLR in+out, RJ45 input

CONSTRUCTION

• Housing: Aluminium
•  IP Rating: IP20
• Operating Temperature: 0-40 ˚C | 32-104 ˚F
• Weight: 3.8kg | 8.37lbs
• Dimensions: 321 x 125 x 90.7mm | 12.63 x 4.92 x 3.57 inches
• Environment: Indoor

V1.12

Indication: two blue flashes on power-up

Jan 17th, 2020

– Fixed: DMX XLR input lost frames when used with certain desks like Avolites Quatz

– Fixed: DMX XLR input dropped too many frames if the framerate of the source was too high

– Fixed: DMX XLR input did not work with some very basic fader desks

– Improved: ArtNet broadcasts can now be handled up to 24 universes in most cases

V1.10

Indication: none

Jan 16th, 2019

– Added: universe number can be set with the button: hold it until the LED starts blinking

V1.9

Indication: none

Oct 17th, 2018

Initial version